Let’s Explore v4 – Cut by Fill Color in Silhouette Studio

Silhouette Studio – Cut by Line Color

In this Let’s Explore v4 tutorial, we will cover the Silhouette Cut by Fill option. The Silhouette Studio software, has 4 options on the Send Tab on how to send the design to be cut – in the top right corner of the Send tab you will find the options Simple, Line, Fill, and Layers.

I’ve covered both the Send Tab – Simple option and the Send Tab – Line option in-depth in previous tutorials.

Affiliate links may be present in the following blog post and as an Amazon Associate, I earn from qualifying purchases.

The Silhouette Cut by Fill option allows you to cut a project by fill color. The Silhouette software generates the list shown under the Fill option based on the colors that you (or the designer) has filled the design with.

In this example using the Mardi Gras Mask file by Cut Files Makers, the file is already filled with color. If a design is not, you would need to select the pieces you want to fill and then select the color you want designated for that piece from the Fill Color Panel on the right or the Fill Color icon in the QAT in the top left of the Silhouette Studio software.

In this Send – Fill option, you have each fill color separated out in it’s own line and you can adjust the settings accordingly.

If you see an option that has a crosshatched pattern in it, that means there is no fill color for that cut line. This can happen when shapes haven’t been filled with a color or there is an image such as a png or jpeg on the file.

Details of the Silhouette Cut by Fill Color

Let’s take a look at what the actions are at the top of the Send tab in Silhouette for Cut by Fill Color.

Tool No.
Choose whether you will be using Tool 1 or Tool 2, also called Carriage 1 and Carriage 2

On/Off
Checked = Cut lines On
Unchecked = Cut lines Off

Bold color lines will be around the design that the cut lines are turned ON for. Notice the purple and yellow lines are not bold since they are turned OFF. Some colors are more difficult to see the bold edge, such as white.

Weld
The outer edge of overlapping objects of the color selected will be cut. Welding typically combines objects, but in this instance, the objects remain separate and the Cut Edge is activated.

Fill Color
The same colors of the fill that were set up on the Design Tab, should all show in the list under Fill Color. Different shades of a color will show up as different options.

Material
Choose the Material type you are using for each color.
Each fill color will need to be changed separately if you did not select the material on the Simple tab before clicking on the Cut by Fill Color option.

Action
Choose what action you will want to perform.

Tool/Carriage
Choose what tool you will be using to perform the action.

If you were to keep all of the colors checked and have the cut lines ON, the order in which they appear in the list is the order in which the action will be done. For instance in my photo that would mean, the green would cut first, then the yellow, and then the purple.

You can rearrange the order by clicking and grabbing a color and move it up or down in the list as shown in the video below demonstrating with the line color option.

Moving down the right side of the Send tab – Fill Option, you will see that the cut settings are expanded further down to show what the settings are for each option you have chosen.

The color that is highlighted (selected) at the top of the panel will be the settings that you see at the bottom. In my photo, the green color is highlighted, so it shows the settings for the green lines in the bottom.

Here is where you can adjust the settings as needed. The key here is to make sure that the color you want to change is the one highlighted at the top AND the color shows on the bottom. We are seeing many users changing the settings for the wrong color.

This happens so often, that I put out a video on the Silhouette Secrets+ YouTube channel showing exactly what I mean. Check it out HERE.

You can also add a Pause in between the difference color actions if you would like to do that versus unchecking the box to turn the cut lines off. Each user is going to vary in what they prefer to do. I prefer to check and uncheck the boxes as needed, just in case I have to step away from my machine.
But you can test out which way works best for you.
See a quick demo of Adding a Pause HERE.

Now, the rest of this panel is the same as when using the Simple tab.
Check out the in-depth tutorial on the Send Tab – Simple Option HERE for all those details.

Having options in the Silhouette Studio software is fantastic! I’m also thrilled with my new shirt adorned with ThermoFlex Plus Metal Flake HTV. Be sure to check out the “Crafting a Shirt with ThermoFlex and Silhouette (Poli-Tape)” video available on the Silhouette Secrets+ YouTube channel right HERE.

Save this for future reference by pinning the image below.

Enjoy !

THANK YOU for your support! How can you help? Click HERE & buy a coffee.
Every little bit helps with the cost of running the site.

**This post may contain affiliate links. What that means is that I may receive compensation if you purchase through the links I have provided. The price you pay for the product or service is not higher but I may get compensated for sharing.